IDE Hard Disk Controller Card

Details

Description

Reviews

Product Details

Product Code: IDECARD
Units in Stock: 0
Product out of stock

Notify me when product is back in stock

Product Description

Pre-order the IDE Hard Disk Controller Card for use with TI-99/4A and Geneve 9640 computers.

Note: IDE Card only works in ROMPAGE mode with the Myarc Geneve 9640 as it was originally designed. Geneve owners cannot at the present time use the IDE to boot from with MDOS 6.50 or access the IDE drives natively from MDOS.

TI-99/4A owners can use this card for both hard disk storage and Real Time clock/date!

Use the SHIFT838 Real Time clock module as a upgrade to the original BQ4847. If chosen as an option the original BQ4847 will not be included and you will receive your board completely setup with the 838-RTC

Note for components: The Resistor Networks (R1, R2 and R3) have been changed in the components from a SOIC-14 to a SOIC-16 due to price and availability. The lead spacing is the same and since the resistors are isolated there is no issue. One resistor on the network will not be connected to anything.

Add a IDE hard disk controller to your TI-99/4A and Myarc Geneve 9640 computer. This is the originaly design by Thierry Nouspikel with the latest DSR loaded from Fred Kaal! Read more about Fred's DSR on his projects page HERE

Fred's DSR allows for IDE1 through IDE8 and support for Primary and Slave drives! Maximum of 260mb per partition per drive.

Proven compatibility with the IDE2CF card and IDE2SD card adapters for use with storage.

The card will be assembled and tested on a real TI-99/4A. If you will be using on a GenMod Geneve then you will need to remove R10 and R11 resistors to make it compatible.

Facebook Pinterest Twitter

$240.00 inc. tax

Select Clock Module*

Add to Cart

Quantity:

Customer Reviews

1 review(s) posted (write review)

The IDE card has arrived and works perfectly.
"Hello, yesterday I was able to pick up the IDE card from the post office and today I installed the card in my TI-99 / 4A PEB box. After I loaded the DSR from floppy disk with IDELOAD and set the time, the flash card now worked as a hard disk for my system. The card itself is made super neat and works perfectly. Many thanks to Shift838 for making this controller and for the fast delivery. Wolfgang on August 29th, 2020" Wolfgang Hess - Saturday, August 29, 2020

IDE Hard Disk Controller Card

Product Details

Product Description

Customer Reviews

The IDE card has arrived and works perfectly.

Recently Viewed Products

Modal Dialog Title