Product Details
GBSVGAGEN2
0
Notify me when product is back in stock
Product Description
GBSVGA Genie 2.0 integrates a LM1881 sync seperator to clean both the horizonal sync line. This board then connects to a GBS8200 Video Convert Converter board which will convert the 15kHz RGB signal to a standard VGA signal.
The GBSVGA Genie V2.0 also has been interfaced to use the 'gbscontrol' external firmware which is programmed into a ESP8266 WEMOS D1 Mini module which allows a smartphone to configure the display paramenters.
The unit has an audio output that can connect to any PC type speakers with a 3.5mm audio jack.
This unit can work with a Geneve 9640 or any other unit that supports 15kHz signals such as the EVPC and AVPC cards, just needs the appropriate cable.
If used with the Geneve then I recommend to purchase my Geneve Video to DB9 adapter. This will allow you to use a straight through DB9 Male to Female cable. And no need to solder any DIN connectors.
https://shift838.fwscart.com/Geneve_Video_2_DB9_Converter/p5569983_20363490.aspxThe GBS8200, Video Adapter, Video Cable, 3D case(Black with Silver buttons only) and Power Supply for GBS8200 is sold seperately (can be included in order - see options!)
GBSVGA Genie V2 Manual
HEREGBS8200 Power requirements: Input Power: 5VDC +/- 0.5V (2A)Requirements:
GBS8200 (sold separately)
5VDC 2A Power supply (not included)
Modification to the GBS8200 board to produce the best possible display:
All the above fixes will be documented in my setup doc to come soon.
See photos. Left photo of dragon is from the GBS8200 on the Geneve.
All boards tested.
| Option | Details |
|
| A | GBSVGA Genie V2.0 + Geneve Video to DB9 Adapter Board |
| B | Option A + Straight through DB9 Male to Female cable |
| C | Option A + 3D printed Case |
| D | Option A + Optioin B + 3D Case |
| E | GBSVGA Geneve V2.0 Only |
| F | Option A + GBS8200 (no mods) and 5v DC Power Supply 110v |
| G | Option A + GBS8200 + All GBS8200 Mods and 5v DC Power Supply 110v |
| H | Full Plug and Play - Everything included! |
3D printed case will only come in Black with Silver buttons.
Notes:
Due to different makes and models of montiors and GBS8200 units your experience may vary.Board will be GREEN.
